Dji Mini Controler Grip
By 1-prop-head
Free
It's free to download
Information
Dji Mini Controler Grip
By 1-prop-head
{:id=>5845, :name=>"materials", :body=>"
I printed this using ABS in three parts. Then I solvent cemented them together. During the print using pause at height you need to install a 3mm nut in the top piece and using a flat head 3 mm machine screw you attach the remaining two parts to the top. Then solvent cement the whole thing as one piece.
Alternatively you could use a raft and support and print the entire part in one go.
Two small flat head machine screws are required to fasten the grip to the back of the controller.
", :record_type=>"Design", :record_id=>43186, :created_at=>"2024-03-22 19:14:50.101", :updated_at=>"2024-03-22 19:20:36.444"}
Alternatively you could use a raft and support and print the entire part in one go.
Two small flat head machine screws are required to fasten the grip to the back of the controller.
39 objects
0 Followers
Joined almost 9 years ago
United States O-HI-O both states
I tinker a lot Like to solve issues one encounters every day. Do it in software Fortunately I can fix most anything and the 3D printer is my favorite go to tool. If you skip class don't skip physics, if you do skip physics you might skip theoretic...
Free